Honda Outboard Break In Procedure. Honda Outboard Set Up Installation And Pre Delivery Bf25a Manual, Page 2 OPERATION Break-in Procedure Next 60 minutes: Break-in period: 10 hours Run the outboard motor up to maximum of 4,000 to 5,000 min Break-in operation allows the mating (rpm) or 50% to 80% throttle surfaces of the moving parts to wear opening Honda outboard motors running-in procedure should be performed as follows, the break-in operation allows the moving parts to wear-in evenly and ensures proper performance and longer outboard motor service life
Honda Outboard Set Up Installation And Pre Delivery Bf25a Manual, Page 2 from www.usermanuals.tech
4-Stroke Outboards Four-stroke MAPI outboards DO NOT come with engine oil already installed You must add engine oil before attempting to start your four-stroke outboard for the first time.
Honda Outboard Set Up Installation And Pre Delivery Bf25a Manual, Page 2
OPERATION SAFE OPERATING BREAK-IN PROCEDURE Next 60 minutes: PRECAUTIONS Run the engine up to a maximum of Break-in period: 10 hours 4,000 to 5,000 rpm, which is about To safely realize the full potential of Proper break-in operation allows the 50% to 80% of maximum throttle this outboard motor, you need a moving parts to wear in smoothly for. • First 15 minutes: Run the outboard motor at idling or trolling You must add engine oil before attempting to start your four-stroke outboard for the first time.
How to Break In An Outboard Motor Marine Parts Warehouse Incorporated. My concern is that when reading through the owners manual, I read the following: "Proper break-in procedure allows the moving parts to wear in smoothly for best performance and long service life For the first 10 hours, run the outboard motor at low speed, and avoid full-throttle operation."
How to Break In An Outboard Motor Marine Parts Warehouse Incorporated. For the First Two Hours of Operation: Start the engine and allow it to reach operating temperature.Get the boat on plane, and operate the engine at up to 4500 RPM's (Important. OPERATION Break-in Procedure Next 60 minutes: Break-in period: 10 hours Run the outboard motor up to maximum of 4,000 to 5,000 min Break-in operation allows the mating (rpm) or 50% to 80% throttle surfaces of the moving parts to wear opening